Thermal

Around a third of all heat lost within un-insulated or poorly insulated buildings escapes through external walls.  Heat naturally flows from a warm area into a cold one and in colder months this cycle is increased causing a greater degree of heat loss.

While improving efficiency and performance of energy systems may be perceived as a potential solution, it is commonly recognised that enhancing the thermal fabric of a building is fundamental in reducing heat loss and fuel consumption within the built environment.

Speedline Thermal Laminate Board provides a dry lining and thermal insulation solution in a single application and is suitable for internal lining of masonry walls, lining the underside of rafters within a pitched roof application and the underside of joists within a flat roof location.

Speedline Thermal Laminate Board will assist you to meet or upgrade to the current Building Regulations and avoid the risk of condensation.  Locating the thermal insulation layer on the internal side of the structure is more responsive to heating conditions, this results on the ambient internal temperature of a building becoming comfortable quicker within the colder months, in addition to reducing thermal bridging through the structure.  This makes Speedline Thermal Laminate Board the ideal solution for internal lining of external walls, pitched roofs and ceilings.

Thermal Laminate Board

A high performance insulation solution comprising a PIR foam with a kraft paper/aluminium multi-layer finish, factory bonded to a 12.5mm tapered edge plasterboard offered in a board size of 1.2m x 2.4m.

The foam has a very low thermal conductivity (k) of 0.022W/mK with the plasterboard 0.19W/mK providing an optimum thermal insulation solution.

Speedline Thermal laminate Range
Board ThicknessLengthWidthThermal resistance (m2 K/W)Weight (kg) *
37.5 (mm)2400 (mm)1200 (mm)1.2027
52.5 (mm)2400 (mm)1200 (mm)1.8528
62.5 (mm)2400 (mm)1200 (mm)2.3029
72.5 (mm)2400 (mm)1200 (mm)2.7530
82.5 (mm)2400 (mm)1200 (mm)3.3031
92.5 (mm)2400 (mm)1200 (mm)3.7031.5

* Weight indicated is approximate

Key Benefits

  • Dry lining and thermal insulation solution in a single board
  • Suitable for both direct bonding (‘dot and dab’) and mechanical fixing
  • Achieves a thermal resistance range of between 1.21m2K/W and 3.70m2K/W
  • Easy to handle and install
  • Ideal for new build and refurbishment projects
  • Manufactured in accordance with ISO 14001:2004
  • The plasterboard facing used within Speedline Thermal Laminate Board achieves an ODP (Ozone Depletion Potential) and GWP (Global Warming Potential) of less than 5
  • The PIR insulation used within Speedline Thermal Laminate Board achieves Zero ODP and GWP of less than 5
  • Board weights range from 27kg – 31.5kg
Other Performance Sectors