AS70 – 70mm Acoustic Stud x 0.5mm flange dimensions 50/48mm

Speedline Acoustic C stud partitions are constructed in the same way as standard C stud systems.  With the exception that the plasterboard edge should be aligned with the offset line on the acoustic stud.  Plasterboard fixing centres remain the same.

 

Benefits

  • Extremely cost-effective
  • Ideal for domestic and commercial use
  • Reduced installation time
  • Slimmer partitions maximise floor space
  • Quieter living spaces
  • Greater sound insulating performance
  • Reduces the transfer of common noise
  • Fire 30-120 mins
  • Acoustic 40-63 RwdB
  • Duty Rating Medium, Heavy and Severe available

A cost-effective way to achieve improved acoustic performance in both domestic and commercial situations, our Acoustic Stud has built in discontinuity which results in improved sound insulation.

Acoustic Stud is designed to offer better sound insulation in the key speech frequency bands (250 to 1000 Hz) whilst maintaining structural strength and integrity.  This enables slimmer partitions to be constructed, maximising floor space but still satisfying high acoustic requirements.

 

Construction

Attention to detail is essential.  Care must be taken in construction to ensure a soundproof structure preforms to its maximum capability.  As sound – like water, light or air – will find the smallest crack and expose it as a weak point, your structure should be built as if it needs to be waterproofed.

A single 25mm hole in an otherwise acoustically sound partition can reduce performance by up to an incredible 15dB.  Although a 25mm hole should be visible, a crack 1mm x 1m will not always be obvious and, if not treated with an acoustic sealant, will be detrimental to the structure.

An acoustic construction is only as good as its weakest point.

Technical Information
Stock Lengths MetreWeight per Length Kgs
2.701.66
3.001.85
3.602.22
4.202.59